Line drawing of an analogue VU meter next to a vinyl record

What Is Mastering – and What Does It Cost?

Mastering is the last step between your finished mix and the release. It's also the step most musicians find hardest to pin down: what does a mastering engineer actually do to your songs – and is it worth paying for when there are apps that do it in a minute?

What mastering does

A mastering engineer works on the finished stereo mix of each song – not on the individual tracks. The job is to make the music translate: sound right on earbuds, in a car, on a big PA and on a turntable, and sit naturally next to the other records your listeners play.

  • Tonal balance. Gentle EQ to fix what the mix room hid – too much low end, harsh upper mids, dull highs – so the song sounds balanced everywhere, not just on the speakers it was mixed on.
  • Dynamics and loudness. Compression and limiting to bring the song to a competitive level without crushing the punch out of it. How loud is a choice that depends on the music and where it's going – more on that in how loud a master should be.
  • Making an album flow. Matching levels and tone between songs and setting the gaps, fades and transitions, so the record plays as one piece rather than a collection of separate tracks.
  • Quality control. Catching clicks, pops, distortion, noise at the start and end, and peaks that will distort when the file is converted to a streaming format.
  • The right files for every format. High-resolution WAV files for digital distribution, separate sides for vinyl or cassette, and a DDP image for CD manufacturing – with ISRC codes if you have them.
Diagram: a finished stereo mix goes through EQ, compression and limiting, then out as separate masters for streaming, vinyl and CD.
What happens between the finished mix and the release.

What mastering can't do

Mastering works on the whole mix at once. If the vocal is buried, the kick is lost or the guitars are fighting the bass, turning up the frequencies of one instrument also turns up everything else that lives there. Small balance issues can be nudged; big ones can't. If your mix has problems, it's better to fix them in the mix – a good mastering engineer will tell you so rather than charge you for a compromise.

When you can't go back to the mix but need more control, stem mastering is a middle ground: you send a few grouped stems – for example drums, bass, guitars and vocals – and the balance between them can be adjusted during mastering.

Mixing vs. mastering

Mixing is about the balance inside a song: levels, panning, EQ and effects on every individual track, until the instruments work together. Mastering takes that finished mix and prepares it for the outside world. Different jobs, often different people – a fresh pair of ears in a different room is part of what you pay for, because the mix engineer has heard the song hundreds of times on the same speakers.

AI and online mastering

Automated mastering services analyse your track and apply a processing chain in seconds, for a low price. For a demo or a quick upload, that can be fine. What they can't do is listen the way a person does: hear that the chorus should open up, that track 5 needs to be a touch quieter than track 4 to feel right, or that the snare only gets harsh when the guitars come in. They also can't talk to you about what you want. For a release you care about – especially an album or a vinyl pressing – an engineer is worth it.

What does mastering cost?

Prices vary a lot: from monthly subscriptions for automated mastering, through independent engineers, to famous mastering studios that charge several times more per track. What usually affects the price:

  • The number of songs – albums and EPs usually get a lower price per track
  • Stereo mastering or stem mastering
  • Which formats you need: streaming only, or also vinyl, cassette or CD
  • How many revisions are included

At Black Sun Audio, mastering a single track costs 500 DKK / €68 / $65. For an album or EP, the first track is 500 DKK and each further track 380 DKK – a 9-song album is 3540 DKK including Danish VAT. Up to 5 revisions are included. All rates are on the prices page.

How to get the most out of your mastering

  • Export at the session's sample rate, 24-bit or higher
  • Leave some headroom and take any limiter off the mix bus (send a limited version as reference if you like the way it sounds)
  • Don't fade or trim the ends – tell me what you want and I'll do it
  • For an album, send the running order and any notes on gaps and transitions
  • Send one or two reference records with the sound you're after

Step by step: how to export a mix for mastering.

Ready to master your release? Have a look at mastering at Black Sun Audio, or get in touch with a link to your mixes.

Further reading

  • Bob Katz, Mastering Audio: The Art and the Science (Focal Press)
  • Bobby Owsinski, The Mastering Engineer's Handbook

Quentin Høegh Nicollet

Producer and engineer at Black Sun Audio in Djursland, Denmark – and a musician first, with more than 15 years of recording, mixing and mastering metal, rock and beyond.